Product ID:XUPER XHD 66
MSDS Date:05/01/1986
FSC:3439
NIIN:00-902-4207
MSDS Number: BHBBV

EUTECTIC CORPORATION

40-40 172ND STREET
FLUSHING, NY 11358

Emergency Phone: (718) 358-4000

Info Phone: (718) 358-4000

Cage: EO060

EUTECTIC CORPORATION

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: EO060

IRON

CAS: 7439-89-6

RTECS: NO4565500

OSHA PEL 5 MG/CUM

ACGIH TLV: 5 MG/CUM

CALCIUM FLUORIDE

CAS: 7789-75-5

RTECS: EW1760000

OSHA PEL 2.5 MG/M3 (F)

ACGIH TLV: 2.5 MG/M3 (F); 8990

POTASSIUM SILICATE

CAS: 1312-76-1

CALCIUM CARBONATE (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9192

FERROSILICON (SILICON/SILICON ALLOYS (AS SI)

CAS: 8049-17-0

RTECS: LK1400000

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION OF THE
RESPIRATORY SYSTEM, NOSE, THROAT/EYES, DAMAGE TO THE LUNGS/ASTHMA,
DISCOMFORT/DIZZINESS/NAUSEA/DRYNESS/SKIN & EYE BURNS, PULMONARY
EDEMA BRONCHITITS/METALLIC TASTE/TIGHTN ESS IN
CHEST/FEVER/RHINITIS/HEADACHE. INGESTION: SEVERE INJURY OR DEATH.
SKIN: CAN FORM ULCERS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: MAY AFFECT CENTRAL NERVOUS
SYSTEM/MUSCULAR WEAKNESS/TREMORS/PNEUMOCONIOSIS/PULMONARY
EDEMA/LUNG FIBROSIS/NERVOUS DISORDERS/BREATHING
DIFFICULT/COUGH/FEVER/CIRCULATORY SYSTEM/MUSCULATURE/SK IN, EYES &
RESPIRATORY TRACT. ARC RAYS CAN INJURE EYES/BURN SKIN/SYSTEMIC
POISONING AFFECTING KIDNEYS/LIVER.
Medical Cond Aggravated by Exposure:PULMONARY DISEASE

First Aid:INHALATION: REMOVE FROM OVEREXPOSURE/APPLY ARTIFICIAL
RESPIRATION, IF NEEDED. EYE/SKIN: WASH WITH SOAP & WATER, ALLERGIC
REACTIONS LIKELY IN ABOUT 10% OF WORKERS. CALL MEDICAL AID.

Unusual Fire/Explosion Hazard:NONFLAMMABLE. WELDING ARC, SPARKS &
BRAZING FLAMES CAN IGNITE COMBUSTIBLES & FLAMMABLES.

Handling and Storage Precautions:TO DETERMINE THE COMPOSITION/QTY OF
FUMES/GASES TO WHICH WORKERS ARE EXPOSED IS TO TAKE AN AIR SAMPLE
INSIDE HELMET/BREATHING ZONE. E
Other Precautions:TRAIN THE WORKER NOT TO TOUCH LIVE ELECTRICAL PARTS &
TO INSULATE HIMSELF FROM WORK & GROUND. TRAIN THE WORKER TO KEEP
HIS HEAD OUT OF THE FUMES.

Respiratory Protection:USE NIOSH APPROVED RESPIRABLE FUME AIR SUPPLIED
RESPIRATOR WHEN WORKING IN CONFINED SPACE.
Ventilation:USE ENOUGH LOCAL EXHAUST/MECHANICAL VENTILATION AT THE ARC
TO KEEP Protective Gloves:WELDER'S
Eye Protection:FACESHIELD W/FILTER LENS.
Other Protective Equipment:ARM PROTECTORS, APRONS, HATS, SHOULDER
PROTECTION. PROVIDE PROTECTIVE SCREENS/FLASH GOGGLES.
Work Hygienic Practices:WELDER SHOULD START W/LENS SHADE TOO DARK TO
SEE WELD ZONE, THEN USE NEXT LIGHTER SHADE.
Supplemental Safety and Health

Appearance and Odor:ARC WELDING ELECTRODE.

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO2, OZONE & NITROGEN OXIDES,
FUMES & GASES OF METAL OXIDES, FLUORIDES.

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATION SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH FEDERAL, STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.